Your Shopping Cart is empty.
View Cart (0 Items)
Forrest Fenn Treasure Chest
Forrest Fenn Treasure Chest
These 10 3/4" x 10 3/4" Forrest Fenn Treasure Chests are individually numbered and limited to 100 to be produced. Poured as a solid cast, they come complete with hardwood lining as well as a lock and key.
Description
Created by Chris Jones, these treasure chests are solid bronze weighing in at 42lbs once complete. Each chest receives an antiquing treatment giving it an aged appearance as a treasure chest should be. As they are made to order, the desired patina can be selected at the time of purchase.
Bronze needs little help to stand the test of time as it is a 100% Non-Ferrous metal meaning it is immune to moisture. However, these chests were designed to have a 1/4" solid bronze wall, floor, and lid before the the dimensions of their carvings ensuring they will last an eternity.
Outer Demensions: 10 3/8 x 10 3/8 x 5 3/4
Weight:42lbs
11-100 $8800 1-10 Starting at $12,000
1/100
2/100
3/100
4/100
5/100
6/100
7/100
8/100
9/100
10/100
11/100
12/100
13/100
14/100
15/100
16/100
17/100
18/100
19/100
20/100
21/100
22/100
23/100
24/100
25/100
26/100
27/100
28/100
29/100
30/100
31/100
32/100
33/100
34/100
35/100
36/100
37/100
38/100
39/100
40/100
41/100
42/100
43/100
44/100
45/100
46/100
47/100
48/100
49/100
50/100
51/100
52/100
53/100
54/100
55/100
56/100
57/100
58/100
59/100
60/100
61/100
62/100
63/100
64/100
65/100
66/100
67/100
68/100
69/100
70/100
71/100
72/100
73/100
74/100
75/100
76/100
77/100
78/100
79/100
80/100
81/100
82/100
83/100
84/100
85/100
86/100
87/100
88/100
89/100
90/100
91/100
92/100
93/100
94/100
95/100
96/100
97/100
98/100
99/100
100/100
Creation Process by: Chris Jones
The treasure chest was designed from an illustration of a Bronze Casket from the 11th or 12th century. These chests are and will be the only official hand crafted renditions of the original.
Design
All wall widths and figures were scaled to size for proportional accuracy. In order to achieve the desired weight of 42lbs, the figures were created more pronounced adding weight to the piece. This was achieved by using a 8.4/1 ratio.
For authenticity purposes, the project called for it to be completely hand carved as it would have been in the 11th or 12th century. Once the wax mold was complete, a master mold was created that would allow the base and lid to be poured in solid pieces.
From Wax to Bronze
When pouring a five dimensional object, special attention has to be given to the gate sizes for the metal to get in as well as proper venting to allow the metal to reach its destination. This purposed additional challenges as there were limited places to attach the sprue(s).
Once this was remedied, the shell process could begin. For days the bronze treasure chest is dipped into solution and sand until there is a wall thick enough to with stand the violent abuse of 2000 degree metal.
The base and lid of the chest were then poured and you could see the final product in an indestructible form as the shell gets busted off the bronze treasure chest. Its is then cleaned and prepared for assembly.
Assembly and Interior
Unlike most bronze sculptures, this project called for moving parts and assembly. A proper hinge had to be created that looked like the original but could hold more weight. Once the feet were attached, the two pieces were joined along with its lock.
The interior lining needed to be White Oak and milled down to the original's size, 1/4" thick. Not only did it need to be stained, but also needed a deep polyurethane treatment as the original was designed to set outside and with stand the elements.
Once all the interior trim was installed, the chest was complete. It was a true honor to be trusted with this project.
•To place an order or inquire about a specific number, email us at contact@vinnettis.com
